Kategori: Rehber

  • Colour Matching on Rubber Labels: Getting Your Brand Colour Right

    The first thing people notice on a rubber label is its colour. A brand colour that looks right on the label affects the whole identity of the product. Yet a colour seen on screen and the colour achieved in flexible PVC are not always perceived as identical. Here we explain how colours are worked on rubber labels, what to watch and how colour approval works.

    Illustration of a soft PVC rubber label and patch

    How colour is created on a rubber label

    On a rubber label, technically a soft PVC label, colour comes from the material itself rather than printing. Each colour is filled into its allotted area of the mould, which keeps boundaries clean and puts the colour inside the material rather than on the surface. We use a phthalate-free formula for our rubber labels.

    Referencing with Pantone

    The most practical way to match colours is to define them with a colour system code such as Pantone. Screen colours vary between devices, so RGB or HEX values alone may not be a reliable reference. A Pantone code makes sure we are talking about the same colour. If your identity guidelines contain colour codes, simply share them; colours are worked in tones close to those codes and presented for approval.

    Number of colours and design

    A rubber label can use several colours, but as the number grows, each colour’s area must be wide enough. Giving a very thin line its own colour can be hard at small sizes, so for multi-colour designs we review colour areas at real size together and suggest simplification if needed.

    Contrast and legibility

    Colour contrast between logo and base directly affects legibility. A light logo on a dark base, or the reverse, makes the logo readable from a distance. The relief already adds depth; contrast reinforces it. The fabric colour matters too: a label base in the same tone as the fabric can disappear, while a clear difference makes it stand out.

    Tone-on-tone labels

    Some brands want the label to blend with the product. On tone-on-tone labels, logo and base are worked in shades of one colour or the same colour, and the logo reads through relief alone. This gives a quiet, premium, modern look, and relief height and surface texture become even more important for legibility.

    Colour variations across a collection

    One label design can be prepared in several colourways for different fabric colours, for example the same logo in three combinations for navy, black and beige products. Planning variations early helps both visual consistency and order management.

    The colour approval process

    • You share your colour codes and design.
    • We review the design and colour areas and send our notes.
    • The final colours and design are presented for your approval.
    • After approval, mould preparation and production are planned.

    The effect of light and surface

    The same colour can look different under different light: shop lighting, daylight and photo lighting can all shift how a label appears. Raised areas also reflect light differently, so one colour may look slightly different on logo and base. Assessing colour in daylight, next to the product’s own fabric, gives the most realistic result.

    Sharing a small swatch of the product’s fabric also helps, so the contrast or harmony between label and fabric can be judged in real conditions.

    Frequently asked questions

    Can metallic or neon colours be used?

    Special colour requests are reviewed according to the design and application. Share the effect you want and a reference, and we will discuss it.

    Why can the label look different from the screen?

    Screens emit light, while the label reflects it; relief and surface texture also affect perception. A physical reference such as Pantone is therefore more reliable.

    Conclusion

    A correct colour reference and a clear approval process help a rubber label reflect your brand colours. See our models on the soft PVC rubber labels page and send your design and colour codes through our quote form.

  • Kauçuk Etikette Renk Eşleştirme: Marka Renginizi Doğru Yakalamak

    Bir kauçuk etiketin ilk dikkat çeken yönü rengidir. Marka renginin etikette doğru görünmesi, ürünün bütün kimliğini etkiler. Ancak ekranda görülen renk ile esnek PVC malzemede elde edilen renk her zaman birebir aynı algılanmaz. Bu yazıda kauçuk etikette renklerin nasıl çalışıldığını, nelere dikkat edilmesi gerektiğini ve renk onay sürecinin nasıl işlediğini anlatıyoruz.

    Soft PVC kauçuk etiket ve arma illüstrasyonu

    Kauçuk etikette renk nasıl oluşur?

    Teknik adıyla soft PVC etiket olan kauçuk etikette renk, baskıyla değil malzemenin kendisiyle verilir. Her renk, kalıpta kendisine ayrılan alana doldurulur. Bu yöntem, renk sınırlarının net olmasını ve rengin yüzeyde değil malzemenin içinde bulunmasını sağlar. Kauçuk etiketlerimizde ftalatsız formül kullanıyoruz.

    Pantone ile referans vermek

    Renk eşleştirmede en pratik yol, renkleri Pantone gibi bir renk sistemi koduyla tanımlamaktır. Ekran renkleri cihazdan cihaza değişir; RGB veya HEX değerleri tek başına güvenilir bir referans olmayabilir. Pantone kodu, hem sizin hem bizim aynı rengi konuşmamızı kolaylaştırır. Kurumsal kimlik kılavuzunuzda renk kodları varsa bunları paylaşmanız yeterlidir. Renkler bu kodlara yakın tonlarda çalışılır ve onayınıza sunulur.

    Renk sayısı ve tasarım

    Kauçuk etikette birden fazla renk kullanılabilir. Ancak renk sayısı arttıkça her rengin kendi alanının yeterli genişlikte olması gerekir. Çok ince bir çizgiye ayrı bir renk vermek, küçük ölçülerde zorlaşabilir. Bu nedenle çok renkli tasarımlarda renk alanlarını gerçek ölçüde birlikte değerlendiriyor, gerekirse sadeleştirme öneriyoruz.

    Kontrast ve okunabilirlik

    Logo ile zemin arasındaki renk kontrastı, etiketin okunabilirliğini doğrudan etkiler. Koyu zemin üzerinde açık renkli logo veya tam tersi, logonun uzaktan da seçilmesini sağlar. Kabartma etkisi zaten bir derinlik sunar; renk kontrastı bunu güçlendirir. Etiketin uygulanacağı kumaşın rengi de hesaba katılmalıdır: etiket zemini kumaşla aynı tonda olursa etiket kaybolabilir, belirgin bir fark ise etiketi öne çıkarır.

    Ton sür ton etiketler

    Bazı markalar etiketin ürünle bütünleşmesini ister. Ton sür ton etiketlerde logo ile zemin aynı rengin farklı tonlarında veya aynı renkte çalışılır; logo yalnızca kabartmayla okunur. Bu yaklaşım sade, premium ve modern bir görünüm sunar. Ton sür ton etiketlerde kabartma yüksekliği ve yüzey dokusu, okunabilirlik için daha da önem kazanır.

    Koleksiyonda renk varyasyonları

    Aynı etiket tasarımı, koleksiyondaki farklı kumaş renkleri için birkaç renk varyasyonunda hazırlanabilir. Örneğin lacivert, siyah ve bej ürünler için aynı logo üç farklı renk kombinasyonuyla çalışılabilir. Varyasyonları baştan planlamak, hem görsel bütünlüğü hem sipariş yönetimini kolaylaştırır.

    Renk onay süreci

    Renk konusunda net bir onay adımı, beklenti farkını en aza indirir. Süreç genel olarak şöyle ilerler:

    1. Renk kodlarınızı ve tasarımınızı paylaşırsınız.
    2. Tasarımı ve renk alanlarını inceleyip notlarımızı iletiriz.
    3. Renk ve tasarımın son hali onayınıza sunulur.
    4. Onaydan sonra kalıp hazırlığı ve üretim planlanır.

    Işık ve yüzeyin etkisi

    Aynı renk, farklı ışık koşullarında farklı algılanabilir. Mağaza aydınlatması, gün ışığı ve ürün fotoğraflarındaki ışık, etiketin rengini farklı gösterebilir. Ayrıca kabartmalı bölgeler ışığı farklı yansıttığı için aynı renk logo ve zeminde biraz farklı tonda görünebilir. Renk değerlendirmesini mümkünse gün ışığında ve ürünün kendi kumaşıyla yan yana yapmak, en gerçekçi sonucu verir.

    Etiketin uygulanacağı ürünün kumaşından küçük bir parça paylaşmak da renk kararını kolaylaştırır. Böylece etiket ile kumaş arasındaki kontrast veya uyum, gerçek koşullarda değerlendirilebilir.

    Sık sorulan sorular

    Metalik veya neon renkler kullanılabilir mi?

    Özel renk talepleri tasarıma ve uygulamaya göre değerlendirilir. İstediğiniz efekti ve referansını paylaşırsanız birlikte konuşuruz.

    Ekrandaki renkle etiketin rengi neden farklı görünebilir?

    Ekranlar ışık yayar, etiket ise ışığı yansıtır. Ayrıca kabartma ve yüzey dokusu da rengin algısını etkiler. Bu yüzden Pantone gibi fiziksel bir referans daha güvenilir sonuç verir.

    Sonuç

    Doğru renk referansı ve net bir onay süreci, kauçuk etiketin marka renklerinizi yansıtmasını kolaylaştırır. Modellerimiz için Kauçuk Etiket İmalatı sayfamızı inceleyebilir, tasarımınızı ve renk kodlarınızı Teklif Al formumuzdan gönderebilirsiniz.

  • Rubber Labels on Sportswear and Tracksuits

    In sportswear, brand visibility matters as much as the product itself. Tracksuits, sweatshirts, training jackets, shorts and leggings are all worn on the move, so the label has to show the brand strongly while moving comfortably with the garment. With its raised logo and flexible body, a rubber label is a frequent choice for sportswear brands.

    Illustration of a soft PVC rubber label and patch

    Advantages of rubber labels in sportswear

    A rubber label, technically a soft PVC label, is made by micro-injection. The raised logo gives a modern, three-dimensional effect that suits the dynamic look of sportswear. Its flexible body moves with the fabric and its smooth surface is easy to clean. We use a phthalate-free formula for our rubber labels.

    Where does the label go?

    • Tracksuit bottoms: the side near the waistband or above the hem; a fold-over label gives a clean look on the side seam.
    • Tracksuit tops and jackets: chest, sleeve or collar; sew-on labels are the most common choice.
    • Sweatshirts and hoodies: front pocket edge, cuff or hem band.
    • Shorts and leggings: waistband or leg edge; small, compact labels suit them.
    • Sports bags: front panel or strap; a strap-through model works well.

    Flexibility and size

    Sportswear fabrics are usually stretchy and the garment is worn in motion, so label size and position should be planned around the stretch direction. A very large label in a stretchy area can restrict movement; a small, compact label fits better. In many applications we produce flexible rubber labels in the 1.8–2.2 mm range; other needs are reviewed with the design.

    Choosing colours

    Sports brands often work with bold, vivid colours. On a rubber label each colour is filled into its own area of the mould, so boundaries are clean. The same label can be prepared in several colourways for the collection’s fabrics, for example a white logo for a black tracksuit and a black logo for a white sweatshirt. Tone-on-tone labels give a quieter, premium look.

    A minimal look with fold-over

    Thanks to its central groove, a fold-over label folds in a U shape over the fabric edge, and the logo can show both outside and inside. On a side seam, pocket edge or waistband it adds a minimal, modern detail and lets the brand present itself elegantly, especially in clean collections.

    Collection consistency

    In a sportswear collection, one logo can appear in different sizes and models: sew-on on the tracksuit, a small fold-over on leggings, strap-through on the sports bag, all part of the same design family. The logo can also be used as a larger patch on a jacket or bag; see our soft PVC patches page.

    Team and club products

    For clubs, academies and teams, rubber labels carry the club identity beyond the kit: training tracksuits, warm-up jackets, backpacks and fan merchandise can share the same logo language. Club colours and badge proportions are fixed at the start, and the right size and model are set for each product group.

    For brands with sub-categories such as running, outdoor and fitness, the label can also show the category visually, for example with the main logo fixed and the category name changing on a lower line.

    Frequently asked questions

    Can rubber labels be used on very stretchy products like leggings?

    Yes, but size and position should follow the fabric’s stretch direction. Less stretchy areas such as the waistband are usually more suitable.

    How does the label behave in washing?

    Soft PVC is easy to clean. Share the product’s care instructions and conditions of use and we will review a suitable design together.

    Can I produce the same label in different colours?

    Yes. Several colourways of one design can be planned to match the collection’s fabrics.

    Conclusion

    With its raised logo, clean colours and flexible body, a rubber label keeps the brand visible on sportswear even in motion. See our models on the soft PVC rubber labels page and tell us about your collection through our quote form.

  • Spor Giyim ve Eşofmanlarda Kauçuk Etiket Kullanımı

    Spor giyimde marka görünürlüğü, ürünün kendisi kadar önemlidir. Eşofman takımları, sweatshirtler, antrenman ceketleri, şortlar ve taytlar; hepsi hareket halinde kullanılan ürünlerdir. Bu ürünlerde kullanılan etiketin hem markayı güçlü biçimde göstermesi hem de ürünle birlikte rahatça hareket etmesi gerekir. Kauçuk etiket, kabartma logosu ve esnek yapısıyla spor giyim markalarının sık tercih ettiği bir çözümdür.

    Soft PVC kauçuk etiket ve arma illüstrasyonu

    Spor giyimde kauçuk etiketin avantajları

    Teknik adıyla soft PVC etiket olan kauçuk etiket, mikro enjeksiyonla üretilir. Logo zeminden yükseltildiği için spor giyimin dinamik görünümüne uyan, modern ve üç boyutlu bir etki sağlar. Esnek gövdesi, kumaşla birlikte hareket eder. Pürüzsüz yüzeyi temizlemeyi kolaylaştırır. Kauçuk etiketlerimizde ftalatsız formül kullanıyoruz.

    Etiket nereye konur?

    • Eşofman altı: Bel bandına yakın yan bölge veya paça üstü. Fold-over etiket yan dikişte sade bir görünüm verir.
    • Eşofman üstü ve ceket: Göğüs, kol veya yaka bölgesi. Dikmelik etiket en yaygın tercihtir.
    • Sweatshirt ve kapüşonlu: Ön cep kenarı, kol ucu veya etek bandı.
    • Şort ve tayt: Bel bandı veya bacak kenarı. Küçük ve kompakt etiketler uygundur.
    • Spor çantası: Ön yüz veya kayış. Kayış geçmeli model burada iyi çalışır.

    Esneklik ve ölçü

    Spor giyimde kumaşlar genellikle esnektir ve ürün hareket halinde kullanılır. Bu nedenle etiketin ölçüsü ve konumu, kumaşın esneme yönü dikkate alınarak planlanmalıdır. Çok büyük bir etiket esnek bir bölgede kumaşın hareketini kısıtlayabilir; küçük ve kompakt bir etiket ise ürüne daha iyi uyum sağlar. Birçok uygulamada 1,8–2,2 mm aralığında esnek kauçuk etiketler üretiyoruz; farklı bir ihtiyaç varsa tasarımla birlikte değerlendirilir.

    Renk seçimi

    Spor markaları genellikle cesur ve canlı renklerle çalışır. Kauçuk etikette her renk kalıpta ayrı bir alana doldurulduğu için renk sınırları nettir. Koleksiyondaki kumaş renklerine göre aynı etiketin birkaç renk varyasyonunda hazırlanması mümkündür. Örneğin siyah eşofman için beyaz logolu, beyaz sweatshirt için siyah logolu bir versiyon planlanabilir. Ton sür ton etiketler ise daha sade ve premium bir görünüm sunar.

    Fold-over ile minimal görünüm

    Fold-over etiket, ortadaki bükülme oluğu sayesinde kumaş kenarına U şeklinde katlanır. Logo hem dışta hem içte görünebilir. Spor giyimde yan dikiş, cep kenarı veya bel bandında kullanıldığında ürüne minimal ve modern bir detay kazandırır. Bu model özellikle sade koleksiyonlarda markanın kendini zarif biçimde göstermesini sağlar.

    Koleksiyon bütünlüğü

    Bir spor giyim koleksiyonunda aynı logo farklı ürünlerde farklı ölçü ve modellerde kullanılabilir. Eşofman takımında dikmelik, taytta küçük bir fold-over, spor çantasında kayış geçmeli etiket aynı tasarım ailesinin parçaları olabilir. Logonun ceket veya çanta üzerinde daha büyük bir arma olarak kullanılması da mümkündür; bunun için Soft PVC arma sayfamıza bakabilirsiniz.

    Takım ve kulüp ürünleri

    Spor kulüpleri, akademiler ve takımlar için hazırlanan ürünlerde kauçuk etiket, kulüp kimliğini forma dışındaki ürünlere de taşır. Antrenman eşofmanları, ısınma ceketleri, sırt çantaları ve taraftar ürünleri aynı logo diliyle hazırlanabilir. Bu tür projelerde kulüp renkleri ve armanın oranları baştan sabitlenir; her ürün grubu için uygun ölçü ve model ayrı ayrı belirlenir.

    Koşu, outdoor ve fitness gibi farklı alt kategorilerde çalışan markalar için de etiket, kategori ayrımını görsel olarak göstermenin bir yolu olabilir. Örneğin ana logo sabit kalırken alt satırda kategori adı değişebilir.

    Sık sorulan sorular

    Kauçuk etiket tayt gibi çok esnek ürünlerde kullanılabilir mi?

    Kullanılabilir; ancak etiketin ölçüsü ve konumu kumaşın esneme yönüne göre planlanmalıdır. Bel bandı gibi daha az esneyen bölgeler genellikle daha uygundur.

    Etiket yıkamada nasıl davranır?

    Soft PVC kolay temizlenen bir malzemedir. Ürünün genel yıkama talimatını ve kullanım koşullarını paylaşırsanız uygun tasarımı birlikte değerlendiririz.

    Aynı etiketi farklı renklerde üretebilir miyim?

    Evet. Koleksiyondaki kumaş renklerine göre aynı tasarımın birkaç renk varyasyonu planlanabilir.

    Sonuç

    Kauçuk etiket, spor giyimde kabartma logosu, net renkleri ve esnek yapısıyla markayı hareket halinde bile görünür kılar. Modellerimiz için Kauçuk Etiket İmalatı sayfamızı inceleyebilir, koleksiyonunuzu Teklif Al formumuzdan bize anlatabilirsiniz.

  • 8 Questions to Ask Before Working with a Rubber Label Manufacturer

    For an apparel or accessory brand, a rubber label is a small but important detail that carries the product’s identity. Working with the right manufacturer makes sure the label suits both the design and the product. So what should you ask at the first meeting? We have gathered eight questions that brand owners, purchasing and product development teams will find useful to clarify before working with a rubber label manufacturer.

    Illustration of a soft PVC rubber label and patch

    1. Which material and method are used?

    Although the name “rubber label” is widespread, these labels are mostly made of soft PVC by micro-injection. It is worth asking which material and formula are used. We use a phthalate-free formula for our rubber labels; the plastisol is prepared with DOTP or DOA.

    2. Which thickness range is worked?

    Thickness determines how well the relief reads and how the label sits on the fabric. For many apparel and accessory applications we produce flexible rubber labels in the 1.8–2.2 mm range. If your product needs a different thickness, mention it at the first meeting.

    3. Which models can be produced?

    Sew-on, strap-through, fold-over or custom-shaped models suit different products. Asking which models the manufacturer works with, and which it recommends for your product, makes the right choice easier.

    4. How are colours matched?

    Brand colours are the most eye-catching aspect of a label. Find out which reference is used (for example Pantone codes) and how many colours can be applied, and ask how colours will be shown during approval.

    5. How does design approval work?

    Ask whether your file is reviewed for feasibility, how adjustment suggestions are shared and after which approval mould preparation begins. A clear approval step prevents unpleasant surprises.

    6. Is there a sample and check stage?

    You may want to see how the label looks before series production. It helps to discuss how the sample stage works, which points are checked and how the process moves forward. Details are clarified per project at the quote stage.

    7. How are packaging and shipment handled?

    How labels are packed, whether they are separated by model or colour and how shipment is planned matter especially for brands working with several production sites. Clarifying this early keeps labels reaching the production line in good order.

    8. How do communication and follow-up work?

    Knowing who your contact is throughout the project, and how progress is followed, makes the work easier. A single point of contact keeps every step clear, from design revisions to shipment.

    Preparing for the meeting

    • Logo or label design (vector if possible)
    • Product and position where the label will be used
    • Approximate size and preferred model
    • Colour codes
    • Approximate quantity and split by model/colour

    Setting the right expectations

    The most common problem in rubber label projects is expectations not being discussed clearly at the start. When the use, application and priority details are stated openly, design and production steps are planned accordingly. Is legibility of the logo, the colour tone or the slimness of the label your main criterion? Sharing that priority helps the manufacturer propose the most suitable solution.

    If you already have a label, share a photo or sample and show what you like or want to change. If you plan different labels for different product groups, collecting them in one list makes the whole project easier to see.

    After the first meeting

    After the first meeting you usually receive a feasibility review, colour and model suggestions and a quote. Reviewing the proposed changes with your own team helps sound decisions: product development can look at size and position, marketing at colour and logo use, purchasing at the order plan. Mould preparation and production planning start after a joint approval.

    In long-term work it also helps to keep a record for each label model: size, colour codes and the final approved design. This makes repeat orders easy to reproduce with the same look, and serves as a reference for small changes next season.

    Frequently asked questions

    Can I start talks if my design is not ready?

    Yes. A sketch or just your logo is enough for a first assessment, and we can develop the label design together.

    Can different labels for different products be worked in one project?

    Yes. For example, a sew-on label for a jacket and a fold-over label for a beanie can be planned together in the same brand language.

    Conclusion

    The right questions keep a rubber label project clear from the start. See our models on the soft PVC rubber labels page, and write to us through our quote form for answers specific to your project.

  • Kauçuk Etiket Üreticisi ile Çalışmadan Önce Sorulacak 8 Soru

    Bir giyim veya aksesuar markası için kauçuk etiket, ürünün kimliğini taşıyan küçük ama önemli bir detaydır. Doğru üreticiyle çalışmak, etiketin hem tasarıma hem ürüne uygun olmasını sağlar. Peki ilk görüşmede neler sorulmalı? Bu yazıda marka sahipleri, satın alma ve ürün geliştirme ekipleri için kauçuk etiket üreticisiyle çalışmadan önce netleştirilmesi faydalı olan sekiz soruyu derledik.

    Soft PVC kauçuk etiket ve arma illüstrasyonu

    1. Hangi malzeme ve yöntem kullanılıyor?

    “Kauçuk etiket” adı yaygın olsa da bu etiketler çoğunlukla soft PVC malzemeyle, mikro enjeksiyon yöntemiyle üretilir. Kullanılan malzemenin ve formülün ne olduğunu sormak önemlidir. Biz kauçuk etiketlerimizde ftalatsız formül kullanıyoruz; plastisol DOTP veya DOA ile hazırlanır.

    2. Hangi kalınlık aralığında çalışılıyor?

    Etiket kalınlığı, kabartmanın okunması ve etiketin kumaş üzerindeki duruşu için belirleyicidir. Birçok giyim ve aksesuar uygulamasında 1,8–2,2 mm aralığında esnek kauçuk etiketler üretiyoruz. Ürününüz farklı bir kalınlık gerektiriyorsa bunu ilk görüşmede belirtmek faydalıdır.

    3. Hangi modeller üretilebiliyor?

    Dikmelik, kayış geçmeli, fold-over veya özel şekilli modeller farklı ürünlere hitap eder. Üreticinin hangi modelleri çalıştığını ve sizin ürününüz için hangisini önerdiğini sormak, doğru seçimi kolaylaştırır.

    4. Renkler nasıl eşleştiriliyor?

    Marka renkleri, etiketin en dikkat çeken yönüdür. Renklerin hangi referansla (örneğin Pantone kodları) çalışıldığını ve kaç renge kadar uygulama yapılabildiğini öğrenin. Renklerin onay sürecinde nasıl gösterileceğini sormak da önemlidir.

    5. Tasarım onay süreci nasıl işliyor?

    Dosyanız alındıktan sonra uygulanabilirlik açısından inceleme yapılıp yapılmadığını, düzenleme önerilerinin nasıl paylaşıldığını ve kalıp hazırlığının hangi onaydan sonra başladığını sorun. Net bir onay adımı, beklenmedik sürprizlerin önüne geçer.

    6. Numune ve kontrol aşaması var mı?

    Seri üretim öncesinde etiketin nasıl görüneceğini kontrol etmek isteyebilirsiniz. Numune aşamasının nasıl işlediğini, hangi noktaların kontrol edildiğini ve sürecin nasıl ilerlediğini konuşmak faydalıdır. Bu konudaki ayrıntılar projeye göre teklif aşamasında netleşir.

    7. Ambalaj ve sevkiyat nasıl yapılıyor?

    Etiketlerin nasıl paketlendiği, model veya renk bazında ayrılıp ayrılmadığı ve sevkiyatın nasıl planlandığı, özellikle birden fazla üretim noktasıyla çalışan markalar için önemlidir. Bu bilgileri baştan netleştirmek, etiketlerin üretim hattına düzenli ulaşmasını sağlar.

    8. İletişim ve takip nasıl yürüyor?

    Proje boyunca kiminle iletişim kuracağınızı ve sürecin nasıl takip edileceğini bilmek, işi kolaylaştırır. Tek bir muhatapla çalışmak, tasarım revizyonlarından sevkiyata kadar her adımın net kalmasını sağlar.

    Görüşmeye hazırlık

    Üreticiyle ilk görüşmeden önce şu bilgileri hazırlamanız, verimli bir başlangıç sağlar:

    • Logo veya etiket tasarımı (mümkünse vektörel)
    • Etiketin kullanılacağı ürün ve konumu
    • Yaklaşık ölçü ve tercih edilen model
    • Renk kodları
    • Yaklaşık adet ve model/renk dağılımı

    Doğru beklentiyi oluşturmak

    Kauçuk etiket projelerinde en sık yaşanan sorun, beklentilerin baştan net konuşulmamasıdır. Etiketin nerede kullanılacağı, nasıl uygulanacağı ve hangi detayların öncelikli olduğu ilk görüşmede açıkça belirtildiğinde, tasarım ve üretim adımları da buna göre planlanır. Örneğin logonun okunabilirliği mi, renk tonu mu, yoksa etiketin inceliği mi sizin için en önemli kriter? Bu önceliği paylaşmak, üreticinin size en uygun çözümü önermesini kolaylaştırır.

    Ayrıca mevcut bir etiketiniz varsa, onun fotoğrafını veya bir örneğini paylaşmak da faydalıdır. Beğendiğiniz veya değiştirmek istediğiniz noktaları göstermek, yeni etiketin hedefini netleştirir. Farklı ürün grupları için farklı etiketler düşünüyorsanız bunları tek bir listede toplamak, projenin bütününü görmeyi kolaylaştırır.

    İlk görüşmeden sonra

    İlk görüşmenin ardından genellikle tasarımın uygulanabilirlik değerlendirmesi, renk ve model önerileri ve teklif paylaşılır. Bu aşamada önerilen değişiklikleri kendi ekibinizle birlikte gözden geçirmeniz, kararların sağlıklı alınmasını sağlar. Örneğin ürün geliştirme ekibi ölçü ve konumu, pazarlama ekibi renk ve logo kullanımını, satın alma ekibi ise sipariş planını değerlendirebilir. Ortak bir onay sonrasında kalıp hazırlığı ve üretim planlaması başlar.

    Uzun soluklu çalışmalarda etiketlerin bir kayıt sistemiyle takip edilmesi de faydalıdır. Her etiket modeli için ölçü, renk kodları ve onaylanan son tasarımın saklanması, sonraki siparişlerin aynı görünümle tekrarlanmasını kolaylaştırır. Yeni sezonda küçük değişiklikler planlandığında da bu kayıtlar referans olur.

    Sık sorulan sorular

    Tasarımım hazır değilse görüşmeye başlayabilir miyim?

    Evet. Bir taslak veya yalnızca logonuz bile ilk değerlendirme için yeterlidir. Etiket tasarımını birlikte geliştirebiliriz.

    Farklı ürünler için farklı etiketler aynı projede çalışılabilir mi?

    Evet. Örneğin mont için dikmelik, bere için fold-over etiket aynı marka dilinde birlikte planlanabilir.

    Sonuç

    Doğru sorular, kauçuk etiket projesinin baştan net ilerlemesini sağlar. Modellerimiz için Kauçuk Etiket İmalatı sayfamızı inceleyebilir, bu sorulara projenize özel yanıt almak için Teklif Al formumuzdan bize yazabilirsiniz.

  • Types of PVC Labels: Models Used on Apparel and Accessories

    In the apparel trade, a PVC label is mostly known as a rubber label. Technically a soft PVC label, it is produced by micro-injection with raised text and logo in your brand colours. But “PVC label” is not a single model: there are different types depending on how it attaches, where it sits and what it communicates. Here we summarise the most common types and which product each one suits.

    Illustration of a soft PVC rubber label and patch

    1. Sew-on rubber label

    The most common model. A stitching margin is left around the label and it is sewn onto the product at its edges. It is used on jackets, coats, sweatshirts, trousers, bags, hats and many other products. The margin is allowed for at the design stage so the seam never runs over the text or logo. Sew-on models can be rectangular, oval, round or shaped to the logo’s contour.

    2. Strap-through label

    This label has slots on both sides and is threaded onto a belt, strap or tape. It is common on bag straps, backpack straps, belts and outdoor gear. As no stitching is needed, it can be added at the final stage and moves with the product.

    3. Fold-over label

    A fold-over label has a bending groove in the middle. It is folded in a U shape over the fabric edge, so the logo can show on both the outer and inner face. On pocket edges, side seams, cuffs and beanie brims it shows the brand elegantly, and it is a favourite of clean, modern collections.

    4. Waistband and back-pocket labels

    On jeans and trousers, back waistband labels were traditionally made of leather or jacron. A rubber label offers a modern alternative here with its raised logo and flexible body. Waistband labels are usually sew-on and are among the brand’s most visible spots.

    5. Accessory and pull labels

    Bags, wallets, card holders and small accessories use small rubber labels shaped to the product. They are sometimes attached with a ring or cord, sometimes sewn on directly. The same design language can also be produced as a soft PVC keychain; see our soft PVC keychains page.

    6. Custom-shaped labels

    Contour-cut labels that follow your logo’s outline look different from a standard rectangle. A brand symbol, mascot or special figure can become a label this way. With raised layers and multiple colours, the label turns into a small brand object.

    Thickness and material

    For many apparel and accessory applications we produce flexible rubber labels in the 1.8–2.2 mm range. This range balances a readable relief with a good drape on the fabric. If you need a different thickness, it is reviewed together with the design. We use a phthalate-free formula for our rubber labels.

    Which model for which product?

    • Jackets, coats, sweatshirts: sew-on or fold-over
    • Jeans and trousers: sew-on waistband label
    • Bags and backpacks: sew-on or strap-through
    • Hats and beanies: small sew-on or fold-over
    • Small accessories: custom-shaped or ring-attached label

    Surface and relief options

    A PVC label’s character comes not only from its model but also from its surface and relief. The logo can be raised above the base or given a recessed look. Several relief layers add depth. Matt and glossy surfaces are considered according to the design, and an edge frame makes the label look neater and more finished.

    Frequently asked questions

    Are a PVC label and a rubber label the same thing?

    In the trade they usually mean the same product. “Rubber label” is the common name; technically it is a soft PVC label made by micro-injection.

    Can a label carry both a logo and text?

    Yes. A logo, brand name and short slogan can be raised together. We check at the design stage whether very small text stays legible at real size.

    How do I decide which model suits me?

    Product type, label position and the brand’s visual language decide. Share your product and design and we will settle the right model together at the quote stage.

    Conclusion

    From sew-on to fold-over, strap-through to custom-shaped, PVC labels carry your brand on the product in many forms. See our models on the soft PVC rubber labels page and share your design through our quote form.

  • PVC Etiket Çeşitleri: Giyim ve Aksesuarda Kullanılan Modeller

    PVC etiket, giyim sektöründe çoğunlukla kauçuk etiket adıyla bilinir. Teknik adıyla soft PVC etiket olan bu ürün, mikro enjeksiyon yöntemiyle kabartma yazı ve logoyla, marka renklerinizde üretilir (temel tanım için Kauçuk Etiket Nedir?). Ancak “PVC etiket” tek bir model değildir; ürüne nasıl takılacağına, nerede duracağına ve neyi anlatacağına göre farklı tipleri vardır. Bu yazıda en sık kullanılan PVC etiket çeşitlerini ve hangi ürüne hangisinin uyduğunu özetliyoruz.

    Soft PVC kauçuk etiket ve arma illüstrasyonu

    1. Dikmelik kauçuk etiket

    En yaygın modeldir. Etiketin çevresinde bir dikiş payı bırakılır ve etiket kenarlarından ürüne dikilir. Mont, ceket, sweatshirt, pantolon, çanta ve şapka gibi pek çok üründe kullanılır. Dikiş payı tasarım aşamasında hesaba katılır; böylece dikiş yazının veya logonun üzerine gelmez. Dikmelik modeller dikdörtgen, oval, yuvarlak veya logonun konturunu izleyen şekillerde üretilebilir.

    2. Kayış geçmeli etiket

    Etiketin iki yanında yuvalar bulunur; etiket bir kemer, kayış veya şeritten geçirilerek kullanılır. Çanta askısı, sırt çantası kayışı, kemer ve outdoor ekipmanlarında sık görülür. Dikiş gerektirmediği için ürünün son aşamasında takılabilir ve ürünle birlikte hareket eder.

    3. Fold-over (kıstırma) etiket

    Fold-over etiketin ortasında bir bükülme oluğu bulunur. Etiket kumaş kenarına U şeklinde katlanarak uygulanır ve logo hem ön yüzde hem iç yüzde görünebilir. Cep kenarı, yan dikiş, kol ucu ve bere kenarı gibi noktalarda markayı zarif bir şekilde gösterir. Bu model, özellikle sade ve modern çizgideki koleksiyonlarda tercih edilir.

    4. Bel ve arka cep etiketi

    Kot ve pantolonlarda arka bel bölgesinde kullanılan etiketler, geleneksel olarak deri veya jakron ile yapılırdı. Kauçuk etiket bu alanda kabartma logosu ve esnek yapısıyla modern bir alternatif sunar. Bel etiketi genellikle dikmelik olarak çalışılır ve markanın en görünür noktalarından biridir.

    5. Aksesuar ve çekme etiketleri

    Çanta, cüzdan, kartlık ve küçük aksesuarlarda ürüne göre şekillendirilmiş küçük kauçuk etiketler kullanılır. Bu etiketler bazen bir halka veya ip ile ürüne bağlanır, bazen de doğrudan dikilir. Aynı tasarım dilinin soft PVC anahtarlık olarak üretilmesi de mümkündür.

    6. Özel şekilli etiketler

    Logonuzun dış hatlarını izleyen kontur kesim etiketler, standart dikdörtgen formdan farklı bir görünüm sağlar. Marka sembolü, maskot veya özel bir figür bu şekilde etikete dönüştürülebilir. Kabartma katmanları ve çok renkli uygulama ile etiket, küçük bir marka nesnesi haline gelir.

    Kalınlık ve malzeme

    Birçok giyim ve aksesuar uygulamasında 1,8–2,2 mm aralığında esnek kauçuk etiketler üretiyoruz. Bu aralık, kabartmanın okunması ile kumaş üzerindeki duruş arasında dengeli bir sonuç verir. Farklı bir kalınlık ihtiyacı varsa tasarımla birlikte değerlendirilir. Kauçuk etiketlerimizde ftalatsız formül kullanıyoruz.

    Hangi model hangi ürüne?

    • Mont, ceket, sweatshirt: Dikmelik veya fold-over
    • Kot ve pantolon: Dikmelik bel etiketi
    • Çanta ve sırt çantası: Dikmelik veya kayış geçmeli
    • Şapka ve bere: Küçük dikmelik veya fold-over
    • Küçük aksesuarlar: Özel şekilli veya halkalı etiket

    Yüzey ve kabartma seçenekleri

    PVC etiketin karakteri yalnızca modeliyle değil, yüzeyi ve kabartmasıyla da belirlenir. Logo zeminden yükseltilerek işlenebilir ya da zemin içine gömülü bir görünüm verilebilir. Birden fazla kabartma katmanı, etikete derinlik kazandırır. Mat ve parlak yüzey tercihleri tasarıma göre değerlendirilir. Kenar çerçevesi, etiketin daha düzenli ve tamamlanmış görünmesini sağlar.

    Sık sorulan sorular

    PVC etiket ile kauçuk etiket aynı şey mi?

    Sektörde genellikle aynı ürün kastedilir. “Kauçuk etiket” halk arasındaki yaygın adıdır; teknik olarak soft PVC etikettir ve mikro enjeksiyonla üretilir.

    Etikete hem logo hem yazı konabilir mi?

    Evet. Logo, marka adı ve kısa bir slogan kabartma olarak birlikte işlenebilir. Çok küçük yazıların gerçek ölçüde okunur kalıp kalmadığını tasarım aşamasında birlikte kontrol ederiz.

    Hangi modelin uygun olduğuna nasıl karar verilir?

    Ürün tipi, etiketin konumu ve markanın görsel dili belirleyicidir. Ürününüzü ve tasarımınızı paylaşırsanız uygun modeli teklif aşamasında birlikte netleştiririz.

    Sonuç

    PVC etiket, dikmelikten fold-over’a, kayış geçmeliden özel şekilliye kadar farklı modellerle markanızı ürün üzerinde taşır. Modellerimizi incelemek için Kauçuk Etiket İmalatı sayfamızı ziyaret edebilir, tasarımınızı Teklif Al formumuzdan paylaşabilirsiniz.

  • How to Prepare an Artwork File for a Soft PVC Patch

    The first step in producing a soft PVC patch is a well-prepared design file. The clearer the file, the more smoothly mould preparation, colour work and approval go. We wrote this guide especially for brand designers, advertising agencies and collection teams. Step by step, we explain what a soft PVC patch file should contain.

    Illustration of a round soft PVC patch with a raised logo

    1. Use a vector file

    The most suitable format for patch artwork is a vector file such as AI, EPS, PDF or SVG. In a vector drawing, lines and edges stay sharp whether the size grows or shrinks, which matters for defining contours and colour areas correctly in mould preparation. If you only have an image such as a JPG or PNG, send it anyway; we will review the design together and, if needed, discuss converting it to vector.

    2. Convert text to outlines

    The fonts used in your file may not be available on our side. Converting text to outlines makes the letters appear exactly as you designed them. In the same way, the final form of fine details and letter spacing should be fixed in the file.

    3. State the real size

    Giving the patch’s real size on the product (width and height) in millimetres makes it easier to judge whether the design is workable. As size decreases, thin lines and small text become harder. If your logo has a very thin sub-line, we check together whether it stays legible at real size, and suggest changes to letter weight or layout if needed.

    4. Define colours with codes

    On a soft PVC patch, each colour is filled into its own area of the mould, so every colour in the design needs a clear code. Pantone codes are a common reference. Along with the codes, it helps to state how many colours the design has. Gradients, shadows and very fine tonal transitions work differently in a moulded method; if your design has such effects, we can plan a simplified version together.

    5. Show the raised layers

    Relief is what gives a soft PVC patch its character. It is important to indicate which parts rise above the base and which stay at base level. For example, the logo may be raised and the background flat, or layers of different heights can be planned within the logo. Adding this as a separate layer or a simple note is enough.

    6. Define the contour and cut shape

    A patch can be rectangular, round or oval, or produced with a contour cut that follows the logo’s outline. Showing the cut shape as a separate line in the file removes uncertainty in mould preparation. For patches that will be sewn on, a stitching margin at the edge should also be considered.

    7. Add application details

    Which product and which area will carry the patch affects design decisions. A cap front panel, a jacket sleeve or a bag flap each bring different size and flexibility needs. Stating the product type and colour lets us give more accurate advice on colour contrast and size.

    Short checklist

    • Vector file (AI, EPS, PDF or SVG)
    • Text converted to outlines
    • Real size (mm)
    • Colour codes and number of colours
    • Raised layers
    • Cut shape and stitching margin
    • Target product and its colour

    The approval process

    Once we receive the file, we review the design and share our notes on feasibility. If needed we suggest small adjustments and present the final version for your approval. Mould preparation starts only after that approval, so there is a clear shared understanding from the start of how the patch will look.

    Common mistakes

    The issues we see most often in design files are: text not converted to outlines, no size given, colours defined only by screen values, and separate colours assigned to very thin lines. In images without a transparent background, the real edge of the patch can also be unclear. Watching these points from the start reduces revision rounds and helps the project move faster.

    Frequently asked questions

    What if I don’t have a vector file?

    Send your existing image (JPG or PNG). We will review the design and discuss with you the need for vector conversion and any possible adjustments.

    Can a logo with gradients be made into a patch?

    On a soft PVC patch, colours are filled into separate areas of the mould, so soft tonal transitions work differently. Planning a simplified version with clean colour areas instead of gradients usually gives a better result.

    When does mould preparation start?

    After the final design has been approved by you. Before approval, we share our feasibility notes and suggestions.

    Conclusion

    A well-prepared design file is the most important step towards a soft PVC patch that looks the way you expect. For sample models, see our soft PVC patches page and send your file through our quote form. We can also work the same design as a rubber label.

  • Soft PVC Arma İçin Tasarım Dosyası Nasıl Hazırlanır?

    Soft PVC arma üretiminin ilk adımı, doğru hazırlanmış bir tasarım dosyasıdır. Dosya ne kadar net olursa kalıp hazırlığı, renk çalışması ve onay süreci o kadar sorunsuz ilerler. Bu yazıyı özellikle marka tasarımcıları, reklam ajansları ve koleksiyon ekipleri için hazırladık. Bir soft PVC arma dosyasında hangi bilgilerin bulunması gerektiğini adım adım anlatıyoruz.

    Yuvarlak soft PVC arma illüstrasyonu, kabartma logo

    1. Vektörel dosya kullanın

    Arma tasarımı için en uygun format vektörel dosyadır: AI, EPS, PDF veya SVG gibi. Vektörel çizimde çizgiler ve kenarlar ölçü büyüse de küçülse de netliğini korur. Bu, kalıp hazırlığında kontur ve renk alanlarının doğru tanımlanması için önemlidir. Elinizde yalnızca JPG veya PNG gibi bir görsel varsa yine de gönderebilirsiniz; tasarımı birlikte değerlendirir, gerekirse vektöre dönüştürme konusunu konuşuruz.

    2. Yazıları çizgiye çevirin

    Dosyada kullanılan yazı tipleri karşı tarafta bulunmayabilir. Bu nedenle yazıları çizgiye (outline) çevirmek, harflerin tam olarak tasarladığınız şekilde görünmesini sağlar. Aynı şekilde, ince detayların ve harf aralıklarının son halinin dosyada sabitlenmiş olması önemlidir.

    3. Gerçek ölçüyü belirtin

    Armanın ürün üzerindeki gerçek ölçüsünü (genişlik ve yükseklik) milimetre cinsinden belirtmek, tasarımın uygulanabilirliğini değerlendirmeyi kolaylaştırır. Ölçü küçüldükçe ince çizgiler ve küçük yazılar zorlaşır. Logonuzda çok ince bir alt yazı varsa, gerçek ölçüde okunur kalıp kalmayacağını birlikte kontrol ederiz. Gerekirse harf kalınlığı veya yerleşim için öneri sunarız.

    4. Renkleri kodlarıyla tanımlayın

    Soft PVC armada her renk, kalıpta kendi alanına doldurulur. Bu nedenle tasarımda kullanılan her rengin net bir kodla tanımlanması gerekir. Pantone kodları bu konuda yaygın bir referanstır. Renk kodlarının yanında tasarımın kaç renkten oluştuğunu da belirtmeniz faydalıdır. Degrade, gölge ve çok ince ton geçişleri kalıp yönteminde farklı çalışır; bu tür efektler varsa tasarımın sade bir versiyonunu birlikte planlayabiliriz.

    5. Kabartma katmanlarını gösterin

    Soft PVC armanın karakterini veren şey kabartmadır. Tasarımda hangi bölümlerin zeminden yükseleceğini, hangilerinin zemin seviyesinde kalacağını belirtmek önemlidir. Örneğin logo kabartmalı, arka plan düz olabilir; ya da logonun içinde farklı yükseklikte katmanlar planlanabilir. Bu bilgiyi ayrı bir katman veya basit bir açıklama notu olarak eklemeniz yeterlidir.

    6. Kontur ve kesim şeklini belirleyin

    Arma dikdörtgen, yuvarlak veya oval olabilir; ya da logonun dış hatlarını izleyen bir kontur kesimle üretilebilir. Kesim şeklini dosyada ayrı bir çizgi olarak göstermek, kalıp hazırlığında belirsizliği ortadan kaldırır. Dikilerek uygulanacak armalarda kenarda bir dikiş payı bırakmak da düşünülmelidir.

    7. Uygulama bilgisini ekleyin

    Armanın hangi ürüne ve hangi bölgeye uygulanacağı, tasarım kararlarını etkiler. Şapka ön paneli, mont kolu veya çanta kapağı farklı ölçü ve esneklik ihtiyaçları doğurur. Ürün tipini ve rengini belirtmeniz, renk kontrastı ve ölçü konusunda daha isabetli öneri sunmamızı sağlar.

    Kısa kontrol listesi

    • Vektörel dosya (AI, EPS, PDF veya SVG)
    • Yazılar çizgiye çevrilmiş
    • Gerçek ölçü (mm)
    • Renk kodları ve renk sayısı
    • Kabartma katmanları
    • Kesim şekli ve dikiş payı
    • Uygulanacak ürün ve rengi

    Onay süreci

    Dosya bize ulaştıktan sonra tasarımı inceliyor, uygulanabilirlik açısından notlarımızı paylaşıyoruz. Gerekirse küçük düzenlemeler öneriyor ve son hali onayınıza sunuyoruz. Kalıp hazırlığı ancak bu onaydan sonra başlar. Böylece armanın nasıl görüneceği konusunda baştan net bir anlayış oluşur.

    Sık yapılan hatalar

    Tasarım dosyalarında en sık karşılaştığımız konular şunlardır: yazıların çizgiye çevrilmemesi, ölçünün belirtilmemesi, renklerin yalnızca ekran değerleriyle tanımlanması ve çok ince çizgilere ayrı renk verilmesi. Ayrıca arka planı şeffaf olmayan görsellerde armanın gerçek sınırı belirsiz kalabilir. Bu noktalara baştan dikkat etmek, revizyon turlarını azaltır ve projenin daha hızlı ilerlemesini sağlar.

    Sık sorulan sorular

    Elimde vektörel dosya yoksa ne yapmalıyım?

    Mevcut görselinizi (JPG veya PNG) gönderebilirsiniz. Tasarımı inceleyip vektöre dönüştürme ihtiyacını ve olası düzenlemeleri sizinle konuşuruz.

    Degrade içeren bir logo armaya uygulanabilir mi?

    Soft PVC armada renkler kalıpta ayrı alanlara doldurulur; bu nedenle yumuşak ton geçişleri farklı çalışır. Degrade yerine net renk alanlarıyla sade bir versiyon planlamak genellikle daha iyi sonuç verir.

    Kalıp hazırlığı ne zaman başlar?

    Tasarımın son hali sizin onayınızdan geçtikten sonra başlar. Onay öncesinde uygulanabilirlik notlarımızı ve önerilerimizi paylaşırız.

    Sonuç

    İyi hazırlanmış bir tasarım dosyası, soft PVC armanın beklediğiniz gibi görünmesinin en önemli adımıdır. Örnek modeller için Soft PVC arma sayfamızı inceleyebilir, dosyanızı Teklif Al formumuzdan gönderebilirsiniz. Aynı tasarımı kauçuk etiket olarak da çalışabiliriz.